Railway Transport Tenders | Tamil Nadu E Tenders

Provision Of Safety W-Beam Steel Fencing 85.774 Km To Prevent Tresspassing And Cattle Runover In Sse/Pway/Ack Section Sse/Pway/Ola Sub Section - 49.144Km

Supply of 3 Revolving Chair V3 Q2

Supply, Fabrication And Installation Of Covered Enclosure For Loco Washing And Overhauling Facilities With Specifications As Given Below: 1. Covered Enclosure From 3 Sides And Top Side And Supported By Suitable Str Ucture As Per Drg.No: Sr.Dee/Rs/Ed/Misc-395. Along With Surface Preparation Of 5X8 Feet Using Grid Plates And With Upvc Pipe Connection From Existing Ro Plant Along With Accessories - 01 No/Set 2. All Sides And Top Cover Ed Enclosure For High Pressure Locomotive Washer As Per Drg.No: Sr.Dee/Rs/Ed/Misc-397 - 01 No/Set Warra Nty Period: 12 Months After The Date Of Delivery

Supply of Modified Earthing Brush Box Assembly For Hitachi Tm Type Hs-15250/A To Rdso Drg No. Skel/4 584 Alt-1 Reference 1 To 10. Warranty Period: 30 Months After The Date Of Delivery

Zonal Contract For Minor Constructions, Repair Works And Supply Of Building Materials For Service, Welfare Buildings And Drains Inside Furnishing Factory & Lhb Including Compound Wall. -Zone-Iv For The Year 2024-25

Supply of 1 Thermal Imager Q2

Supply of Insulating Rod Assembly For Positive And Negative Support To 3Twd.095.007, Alt-6 Warranty Perio D: 30 Months After The Date Of Delivery

Supply of Pin Split Cotter Steel 10 X 112Mm To Is.549/74.Steel And Drg No.L/Metric/2. Wa Rranty Period: 30 Months After The Date Of Delivery

Supply of 1 Digital Multimeter As Per Is 9000 Q3

Supply of Pin To Stone India Ltd New Ref, No.S0221125701 Or Equivalent For Am 12 Panto Graph For Emu Use Warranty Period: 30 Months After The Date Of Delivery

Supply, Installation And Commissioning Of Hydraulic Pipe Bending Machine As Per Following Specification:- Machine Should Be Capable To Bend Round Ms/Gi & Ss Pipe Of 10 To 5 0 Mm Diameter. Motor Capacity: 211P/415V/3 Phase/50 Hz And 1440 Rpm. Bending Pressure Up To 10 Ton. Tank Capacity 30 Lts. Working Pressure Approx. 300 Kg/Cm2. Machine To Be Supplied With 1 Set Of Seal Kit, Foot Swit Ch, Limit Switch, Stand And Stopper. With 10-Meter Power Supply Electric Cable. Make/Brand: Hydro Bend/ Vanko S /Premier/Surmangalam/Soliman Or Similar. Die Set Of Steel Casting As Per Details Given Below. A 10 Mm Od Wit H Maximum 3 Mm Thickness - 02 Nos. B 1/2 Od With Maximum 3 Mm Thickness - 02 Nos. C 18 Mm Od With Maximum 3 Mm Thickness-02 Nos. D 3/4Od With Maximum 3 Mm Thickness - 02 Nos. E 22 Mm Od With Maxi Mum 3 Mm Thickness-02 Nos. F 1 Od With Maximum 3 Mm Thickness - 02 Nos. G 28 Mm Od With Maximum 3 Mm Thickness - 02 Nos. H 33 Mm Od With Maximum 3 Mm Thickness - 02 Nos. I 25 Mm Od With Maximum 3 Mm Thickness-02 Nos. Installation And Commissioning, Free Training To Be Given After The Installation And Comm Issioning. Joint Commissioning Of Material Should Be Done Within The Month After Receipt Of The Material. Additional Components, If Required At The Time Of Commissioning Shall Be Borne By The Supplier. Minor Alterations, If Required By The Consignee Shall Be Borne By Supplier. At Least 2 Sets Of Operation And Maintenance Manual Shall Be Provid Ed. Warranty: The Equipment Shall Have Warranty Of Two Years For Any Manufacturing Defects For All Electrical And Mechanical Parts Provided In It From The Date Of Commissioning. During Warranty Period The Supplier Shall Rectify/R Eplace The Defective Parts Free Of Cost. Warranty Period: 24 Months After The Date Of Delivery

Supply of Spare Cast Alluminium Alloy Aerofoil Impeller Duly Balance Suitable For Mvsl Blower To Clw Specifi Cation No. Clw/Es/B-14 Alt. C Warranty Period: 30 Months After The Date Of Delivery